What is your primary use case for Ubiquiti UniFi Switches?

We have been using Ubiquiti UniFi switches both at home and in the office. We primarily use them for smaller networks, not in a large enterprise environment. They are suitable for environments with around ten to 20 people.

UniFi products have a good graphical user interface. I work for a system integrator company, where we provide solutions to customers and resellers of these products. Ubiquiti offers competitive price. The products, including the controller and access points, are comfortable to use and of decent quality.

We use the platform to support our wireless infrastructure in a building. The facility serves multiple functions across different floors, including a showroom where we provide internet access to clients.

Ubiquiti UniFi Switches help me to control devices remotely through a network.

We use the solution to manage your IT network and IT security. You must access the network using the UniFi Controller software to configure, monitor, and manage your network equipment. The UniFi system's performance is reliable.

We use Ubiquiti UniFi Switches internally and as part of our managed client service.

I use the solution in my company for Ubiquiti UniFi PoE Switch and EdgeSwitch.

We deployed Ubiquiti UniFi Switches for our enterprise office-level network, establishing a multi-layer LAN network encompassing several locations connected via VPN side-to-side connections.

I am in the audio-visual industry. All the TVs, PCs, mobile phones, iPads, and tablets connect to the solution.

The best use cases for the unmanned or the Layer two Ubiquiti UniFi Switches have been in small businesses, which are companies with less than 50 employees.

We primarily use the solution for access points. We want to improve the quality of the service by having devices on edge as well. We have all of the IPs converging on the switches and controlled by the controller. Sometimes we would notice quality issues. It may be due to the non-homogeneity of the networks, so we will aggregate the switches under Cisco.

Our company uses the solution for logistics scanning in warehouses. We have 200 users across logistics staff, technicians, administrators, and directors.

We are a training center, so we cater to trainees and students. We are customers of Ubiquiti.

All we have is WiFi extenders and ceiling signal extenders. They likely bear another name. I think they function extremely well. We use internet signals for our TV almost daily and have TV all across the place. Behind the counter, we have a system. We occasionally live-stream some of the events that take place here, therefore a reliable system is definitely required. We use social media frequently, and a large number of people who come and go really use our wifi.

I mainly use UniFi Switches to power access points and P2P devices. If I have a backhaul point-to-point wireless link, I forward them by using these switches because they have two voltages (24 and 48) that I can switch between according to my needs.

I use Ubiquiti UniFi Switches to deploy new UniFi devices and to monitor the devices. I use it to find and manage users connected to those devices.

Ubiquiti UniFi Switches does everything I need it to do. I've been pretty happy with it. It's a wired switch, that's what it does.

We tend to use the solution when clients are not willing to spend money for Meraki or Aruba. We use them as switches. The basic use case is going to be an office with as many as 100 users. I position them to have one access point cover 150 to 200 square feet or as much as 350 square feet - depending upon the height of the ceiling. It's usually in an office scenario. Whether circular or flat, they do really well facing down, which means you want to put them up top. If that's the use case, you put them on the ceiling. If I have a situation where the clients don't want to put it on the ceiling, I'll use the Access Point Flex HD, which is circular and I can place that on a desk or on a shelf or someplace and hide it.

Through my distributors, I'm an authorized reseller for Ubiquiti.

I have yet to explore the use cases. Of the eight or ten users with whom we set it up, I have not yet received feedback about the solution or whether it engenders problems. Perhaps this is something I should pursue, to satisfy myself that the solution is being utilized and to apprise myself of any issues.

We primarily use the solution as a bridge to extend our LAN.

One of the primary use cases we have for this solution is providing WiFi to end users.

I use Ubiquiti UniFi Switches. I like the Ubiquiti PoE EdgeSwitches, but I have to use their switches in certain cases because I have 24-volt and 48-volt PoE. Ubiquiti runs 24-volt PoE in a lot of their radios. We use our switches to have programmable voltages. Our day-to-day use cases with Ubiquiti UniFi Switches is basically internal LAN switches for routing WiFi by normal LAN traffic and telephony. We also have to worry about load balancing, because of our telephony in cameras on the same networks.

Our primary use case is an access switch.

We mostly use the solution for wireless. We have a lot of wireless clients. That's the big bulk of usage as we're rapidly evolving to IOT.

We use Ubiquiti UniFi Switches for our Wi-Fi solution to support wireless devices.

We primarily use this solution for the VPN and it has been successful for us.

Our primary use case is to have for security.

We are a solution provider and Ubiquiti UniFi switches are one of the products that we implement for our customers. The use case for this solution depends on the size of the infrastructure. Normally, for smaller installations, we use the routing functionality because they are layer three switches. In larger organizations, we use it as a layer two switch and we use Compass routers to handle 10-gigabit bandwidth. We have one customer using this configuration who does 3D modeling and 3D printing, which requires a lot of bandwidth.

We are a customer of Ubiquiti. The key for us is the switch. The edge with the core switch, servicing office environments. I believe we use the US-48 and US-24, with a 10 gig with the SFP+ port. We have about 200 deployments scheduled for the next few weeks, so I'd say in total we will have 200 to 300 people involved and we plan to increase usage.

We primarily use the solution to enhance the availability of power on our network. It's also used to speed up the traffic.

Our primary use case of this solution is to support our users by providing internet services and university academic system software resources.

We are a tech services company and this is one of the solutions that we provide to our customers. I have worked a great deal with Ubiquiti switches and other products. The primary use case for this solution is to supply power to access points and Voice over IP devices. For example, we install one 24-port switch so that we can connect multiple devices into it, and then create different VLANs.

We primarily use the solution for our local network.