Manager of networks and infrastructure at a government with 5,001-10,000 employees
Real User
2022-10-30T15:09:00Z
Oct 30, 2022
I've found the VLAN test feature to be most valuable. That's because not many devices do VLAN tests. Normally, I have to send a center technician to check a line and see if it's alive. If it's working, then I have to send a network technician out to log into a switch and see which port it's on and on which VLAN that port is. That's two persons and two separate visits. This device does all of this in a matter of seconds, and that has saved me a lot of time, troubleshooting, and resources.
Network Analyst/Engineer at a media company with 1,001-5,000 employees
Real User
2022-10-27T09:14:00Z
Oct 27, 2022
The most valuable feature is the end-to-end testing with the "dart," as they call it, where you can test for faults in the cable or if they've been terminated properly.
Performance testing is the most valuable feature. It gives a brief summary of the information we're looking at, such as latency, jitter, and the available throughput.
Network analyst at a university with 10,001+ employees
Real User
2022-06-29T19:15:00Z
Jun 29, 2022
It provides a way to test 10Gig connectivity. Previously, we had to hook up a switch. That was our only way. Now, with LinkRunner, we can test on the fly if an SFP is bad or if the switch has the right configuration on it.
LinkRunner 10G is very handy for onsite troubleshooting and implementations. We can quickly identify the links in terms of 1G, 2.5G, 5G, and 10G on the copper side, and also from 1G up to 10G on the fiber side. It is very handy for me because we deal with a lot of banks. Especially for the provisioning of new services, we use this tool to identify the link capacity and do the necessary testing to ensure all the circuits are ready before the handover to the next team to operate the technology. This is something that saves a lot of time as compared to the old days.
Network & Infrastructure Analyst with 201-500 employees
Real User
2022-06-21T17:10:00Z
Jun 21, 2022
The auto-test feature is vital and does 90 percent of what I need on its own. It's fast and I can get there in just a few clicks. It does a good job and tells me everything I need to know. LinkRunner works pretty quickly and always seems to be accurate.
Director of Technology at a educational organization with 201-500 employees
Real User
2022-05-10T12:01:00Z
May 10, 2022
In terms of network validation, and copper and fiber Ethernet configuration, I can't imagine life without LinkRunner devices. The minute I got the 10G, everybody was fighting over it. They had never used such a device before and it was just breathtaking for them to very quickly see the validation you can gain from these devices.
In terms of documenting ad hoc additions and other changes to wired ethernet connections, this product is very good. It keeps the information in the cloud and I have the ability to name it. This makes it very nice and easy to see.
Network Administrator at a university with 501-1,000 employees
Real User
2022-03-07T22:25:00Z
Mar 7, 2022
The LLDP decoding is better than on some of the other devices that we've used. Specifically, it goes beyond the minimum of the LLDP data to decode, and it shows the LLDP port descriptions. That makes it vastly simpler to identify which port you're connecting to on a switch that's patched back to some other building, rather than having to figure out an SNMP index or something else.
The AutoTest feature makes it easy for you on both ends. It's an excellent feature, especially if you're by yourself. You plug one end in and you hit AutoTest. It sits and waits for you to plug in the other end and it starts testing.
LinkRunner AT 3000 & 4000. Next Generation Copper and Fiber Ethernet AutoTester. Fast and comprehensive validation of network links and powerful copper and fiber network connectivity troubleshooting. Tests from 10Mbps to 10Gbps, PoE, VLAN, switch port, path analysis, packet capture, topology mapping and so much more!
I've found the VLAN test feature to be most valuable. That's because not many devices do VLAN tests. Normally, I have to send a center technician to check a line and see if it's alive. If it's working, then I have to send a network technician out to log into a switch and see which port it's on and on which VLAN that port is. That's two persons and two separate visits. This device does all of this in a matter of seconds, and that has saved me a lot of time, troubleshooting, and resources.
The most valuable feature is the end-to-end testing with the "dart," as they call it, where you can test for faults in the cable or if they've been terminated properly.
Performance testing is the most valuable feature. It gives a brief summary of the information we're looking at, such as latency, jitter, and the available throughput.
It provides a way to test 10Gig connectivity. Previously, we had to hook up a switch. That was our only way. Now, with LinkRunner, we can test on the fly if an SFP is bad or if the switch has the right configuration on it.
It is fast in providing results. It is pretty accurate.
LinkRunner 10G is very handy for onsite troubleshooting and implementations. We can quickly identify the links in terms of 1G, 2.5G, 5G, and 10G on the copper side, and also from 1G up to 10G on the fiber side. It is very handy for me because we deal with a lot of banks. Especially for the provisioning of new services, we use this tool to identify the link capacity and do the necessary testing to ensure all the circuits are ready before the handover to the next team to operate the technology. This is something that saves a lot of time as compared to the old days.
The auto-test feature is vital and does 90 percent of what I need on its own. It's fast and I can get there in just a few clicks. It does a good job and tells me everything I need to know. LinkRunner works pretty quickly and always seems to be accurate.
In terms of network validation, and copper and fiber Ethernet configuration, I can't imagine life without LinkRunner devices. The minute I got the 10G, everybody was fighting over it. They had never used such a device before and it was just breathtaking for them to very quickly see the validation you can gain from these devices.
In terms of documenting ad hoc additions and other changes to wired ethernet connections, this product is very good. It keeps the information in the cloud and I have the ability to name it. This makes it very nice and easy to see.
The LLDP decoding is better than on some of the other devices that we've used. Specifically, it goes beyond the minimum of the LLDP data to decode, and it shows the LLDP port descriptions. That makes it vastly simpler to identify which port you're connecting to on a switch that's patched back to some other building, rather than having to figure out an SNMP index or something else.
The AutoTest feature makes it easy for you on both ends. It's an excellent feature, especially if you're by yourself. You plug one end in and you hit AutoTest. It sits and waits for you to plug in the other end and it starts testing.