Manager of networks and infrastructure at a government with 5,001-10,000 employees
Real User
2022-10-30T15:09:00Z
Oct 30, 2022
I have LinkRunner G2, and I use this product for testing and troubleshooting. I am able to test my network connections and cables and do general troubleshooting for network drops, network outlets, etc. I do connectivity tests and cable verification, and I use it to do network link tests to check network drops and know whether it's alive or not alive, and if it is alive, which services are available. This tool does that quite well. It tells me if my link is alive, and not just that, if it is a switch, I get the model information of the switch and whether PoE is being delivered on the switch or the wire. I get the DNS server, and I get the IP address. It also checks if there is internet access on that line. If there's a VLAN, it gives me the VLAN number. It does quite a lot of tests in a very quick time. It saves me a lot of time. I don't have to run around and troubleshoot one thing after another.
Network Analyst/Engineer at a media company with 1,001-5,000 employees
Real User
2022-10-27T09:14:00Z
Oct 27, 2022
I work for one of the biggest port operators in the United Kingdom. I'm a network analyst/engineer, and I use the LinkRunner on a daily basis to check network connectivity from areas around where I work or from the switches in the LAN room, whether it's to check VLAN info to determine if the port is live, or end-to-end testing of the cables.
I use LinkRunner for new deployment testing environments to validate solutions and to prove to us and our clients that we're delivering what they're looking for. LinkRunner provides us with all the relevant information we need, test results, and validates everything that we've done. The tools are shared across our team, which is about eight people.
Network analyst at a university with 10,001+ employees
Real User
2022-06-29T19:15:00Z
Jun 29, 2022
We have a lot of the normal LinkRunners, and we have the 10Gig ones called LinkRunner 10G Professional Kit that we use to determine connectivity for plug-and-play. We use the Cisco DNA Center. So, the polarity needs to be right and the link needs to be up. We usually test it with LinkRunner, and then we bring the switch up, and it automatically discovers it.
Typically, I use it for identifying fiber connections to make sure that we have solid links in both directions. I like the bandwidth (iperf) built in testing. If only carrying the LR10G, you can use the JuiceSSH to access switches.
We are a system integrator, and we do lots of infra projects. It is a handheld device, and we are using it in a couple of scenarios. We use it for onsite troubleshooting and implementation. We also use it for performance testing. These are two major use cases. There are also other scenarios where some of its minor features are helpful.
Network & Infrastructure Analyst with 201-500 employees
Real User
2022-06-21T17:10:00Z
Jun 21, 2022
I mostly use LinkRunner for the auto-test LAN option. We use it to diagnose wall plates, test cable lengths, and perform simple captures and pings. I carry the unit in my tool bag, and I am the only person who uses it. One of the other team members has the same title as me, does the same basic tasks, and carries the same tools. The other person who uses this is the department director. He's the supervisor, so he makes decisions, but he also does hands-on repair work.
Director of Technology at a educational organization with 201-500 employees
Real User
2022-05-10T12:01:00Z
May 10, 2022
We use it for general connectivity issues and trying to determine throughput on fiber and throughput on the wired part of the network. We have a lot of excess network traffic and we are trying to determine if it is inherent to a particular run of fiber or a particular network switch. We've been chasing activity around campus for most of the year, including VLANs and things of that nature. A lot of it was pretty simply explained and it was really easy to see on this device.
My primary use cases are plugging into a port to determine what switch it is, the name of the switch, what VLANs are on it, and to test if there is a correct connection or even a correct termination on both sides.
Network Administrator at a university with 501-1,000 employees
Real User
2022-03-07T22:25:00Z
Mar 7, 2022
I work for a college and we have mostly been using it on campus, whenever we've been adding fiber optic links between switches or routers, to identify paths and determine if they're plugging into the intended switch and port, before we plug it in with the actual switch. The other use case is that we're starting to do troubleshooting with LinkRunner but we haven't done a lot of that yet. If we're seeing errors on a link, we're trying to use it to identify the source or the severity of them using something that is not part of our switching structure. Having something that's a separate standard or measuring device is very appealing.
We use it to test customers' networks, either fiber or Category 6 cable. We run BERT tests to analyze the fiber or cable. For example, next week I'll be using it at a customer who is stating that they ran a bunch of data cables and they're hiring us to validate the cables and make sure there are no problems with it. Their IT department is saying when they installed the network, everything slowed down. We'll go in there and use LinkRunner.
Senior Information Security Analyst at Peterbilt Motors Co., PACCAR
Real User
2019-02-27T19:11:00Z
Feb 27, 2019
We use this for daily work for desktop, network, server and infrastructure sections. It can be used in the office environment, factory floor, up in the rafters and out in the elements. With the device being rugged, it has withstood all that we've put it through with minimal issues.
LinkRunner AT 3000 & 4000. Next Generation Copper and Fiber Ethernet AutoTester. Fast and comprehensive validation of network links and powerful copper and fiber network connectivity troubleshooting. Tests from 10Mbps to 10Gbps, PoE, VLAN, switch port, path analysis, packet capture, topology mapping and so much more!
I have LinkRunner G2, and I use this product for testing and troubleshooting. I am able to test my network connections and cables and do general troubleshooting for network drops, network outlets, etc. I do connectivity tests and cable verification, and I use it to do network link tests to check network drops and know whether it's alive or not alive, and if it is alive, which services are available. This tool does that quite well. It tells me if my link is alive, and not just that, if it is a switch, I get the model information of the switch and whether PoE is being delivered on the switch or the wire. I get the DNS server, and I get the IP address. It also checks if there is internet access on that line. If there's a VLAN, it gives me the VLAN number. It does quite a lot of tests in a very quick time. It saves me a lot of time. I don't have to run around and troubleshoot one thing after another.
I work for one of the biggest port operators in the United Kingdom. I'm a network analyst/engineer, and I use the LinkRunner on a daily basis to check network connectivity from areas around where I work or from the switches in the LAN room, whether it's to check VLAN info to determine if the port is live, or end-to-end testing of the cables.
I use LinkRunner for new deployment testing environments to validate solutions and to prove to us and our clients that we're delivering what they're looking for. LinkRunner provides us with all the relevant information we need, test results, and validates everything that we've done. The tools are shared across our team, which is about eight people.
We have a lot of the normal LinkRunners, and we have the 10Gig ones called LinkRunner 10G Professional Kit that we use to determine connectivity for plug-and-play. We use the Cisco DNA Center. So, the polarity needs to be right and the link needs to be up. We usually test it with LinkRunner, and then we bring the switch up, and it automatically discovers it.
Typically, I use it for identifying fiber connections to make sure that we have solid links in both directions. I like the bandwidth (iperf) built in testing. If only carrying the LR10G, you can use the JuiceSSH to access switches.
We are a system integrator, and we do lots of infra projects. It is a handheld device, and we are using it in a couple of scenarios. We use it for onsite troubleshooting and implementation. We also use it for performance testing. These are two major use cases. There are also other scenarios where some of its minor features are helpful.
I mostly use LinkRunner for the auto-test LAN option. We use it to diagnose wall plates, test cable lengths, and perform simple captures and pings. I carry the unit in my tool bag, and I am the only person who uses it. One of the other team members has the same title as me, does the same basic tasks, and carries the same tools. The other person who uses this is the department director. He's the supervisor, so he makes decisions, but he also does hands-on repair work.
We use it for general connectivity issues and trying to determine throughput on fiber and throughput on the wired part of the network. We have a lot of excess network traffic and we are trying to determine if it is inherent to a particular run of fiber or a particular network switch. We've been chasing activity around campus for most of the year, including VLANs and things of that nature. A lot of it was pretty simply explained and it was really easy to see on this device.
My primary use cases are plugging into a port to determine what switch it is, the name of the switch, what VLANs are on it, and to test if there is a correct connection or even a correct termination on both sides.
I work for a college and we have mostly been using it on campus, whenever we've been adding fiber optic links between switches or routers, to identify paths and determine if they're plugging into the intended switch and port, before we plug it in with the actual switch. The other use case is that we're starting to do troubleshooting with LinkRunner but we haven't done a lot of that yet. If we're seeing errors on a link, we're trying to use it to identify the source or the severity of them using something that is not part of our switching structure. Having something that's a separate standard or measuring device is very appealing.
We use it to test customers' networks, either fiber or Category 6 cable. We run BERT tests to analyze the fiber or cable. For example, next week I'll be using it at a customer who is stating that they ran a bunch of data cables and they're hiring us to validate the cables and make sure there are no problems with it. Their IT department is saying when they installed the network, everything slowed down. We'll go in there and use LinkRunner.
We use this for daily work for desktop, network, server and infrastructure sections. It can be used in the office environment, factory floor, up in the rafters and out in the elements. With the device being rugged, it has withstood all that we've put it through with minimal issues.