What is your primary use case for Cisco Ethernet Switches?

The Cisco Ethernet switches are primarily used as regular core switches for networking, distribution, and access levels. We also utilize Cisco Wi-Fi, VPN, and Wi-Fi controllers.

I am using Cisco Ethernet Switches in my company.

I used Cisco Ethernet Switches primarily for campus networks, specifically in hospitals, to provide endpoint connectivity for users, including doctors, and to support wireless access points for devices like iPads.

Our company's customers use the switches in their initial layer, layer 2, and layer 3 networks. Some of our organization's customers also use the product as call switches. Our company works with all types of switches. Lastly, we purchased SG500 or SMB switches from Cisco, which are straightforward to use.

The use case for Cisco Ethernet switches is foundational networking, which includes packet switching and routing within the organization's network. It facilitates communication between devices and networks, ensuring data packets are appropriately directed to their destinations.

We use Cisco Ethernet Switches to interconnect the 20 to 25 servers and workstations in our control room.

At present, I am evaluating Cisco Ethernet Switches.

Cisco Ethernet Switches can be used for any particular application. We have many customers like IDBI and State Bank of India using Cisco switches, Cisco routers, and Cisco SD-WAN. My organization provides some Cisco switches and AMCs of Cisco switches.

We use the solution for everything. We primarily use the solution in our office and for our data center. We're using older versions.

We use Cisco Ethernet Switches in government offices that are in multiple locations.

We use Cisco Ethernet Switches in our data center.

We use the Cisco 9200 and 2960 Ethernet Switches to connect our devices to the network.

We use Cisco Ethernet Switches to connect our infrastructure and application communication.

I am using Cisco Ethernet Switches for internet usage.

Our company uses the solution to set up local access networks for users and route applications. We work with several models including 9300 and 9500. We plan to increase usage in the future.

All Ethernet switches come in various sizes and capabilities. For example, we can have a 12-port switch, a 24-port switch, or even a 48-port switch with multiple fiber up-links. Additionally, there are different feature sets depending on the brand and model, such as IP services, LAN-based, or IP-based. Stacking is only possible with similar feature sets, which means two 9300 switches may not be stackable, but up to eight of the same model may. Additionally, the iOS and feature set capabilities may differ between the same models. All of the switches are Ethernet, but the features they are equipped with vary, which means they will operate differently. For example, a LAN-based switch will only work at primarily layer 2, whereas IP services works more as a router with features such as NAT, multicast, dynamic routing, QOS, and other additional and advanced services. Generally, we use the switches to provide LAN access to endpoints (workstations, cameras, wireless access points, IP phones, and so on).

We are a university with around 1,000 instructors and more than 15,000 students. We use Cisco for access points and endpoint cable networks. We used the 9000 series for years, and now we are working with the Catalyst 9300. Before that, we were using a 2960 switch and a 6500 for the Cisco side.

If I have to make some connections, I use Cisco products and protocols, but if I have to multitask or have other requirements, that's where I use Cisco Ethernet Switches. I also use Cisco Ethernet Switches for my storage use case, particularly for FCIP.

We use Cisco Ethernet switches for building on-site LAN projects and topologies. It depends on the switches I use. Usually, it's supposed to be a PoE, especially if we're supporting VoIP and wireless technologies. We deploy everything on-premises because I work with government entities in Singapore.

My former employer used the solution to build a campus network that included one distribution switch for each of its 200 buildings. Every building had its own Catalyst 3750 Series switch that provided access layers connecting back to 7600 Series distribution switches and routers. We used the MPLS network to build OSPF and PGP and provide multiple services with their own VRFs such as data NPT television and building management systems. The solution provided a high-end throughput that was easy to handle, implement, and route.

We primarily use the solution in the access layer for connecting EP-phone, PC, and access points. We use Cisco, like 3850, for the aggregation layer, and we use 6500 catalyst switches for the core layer.

I am using the Cisco Ethernet Switches in the food industry.

Cisco Ethernet Switches are used in a network as a relay.

Cisco Ethernet Switches are used for directing network traffic.

We have distributed locations, and we have them at different locations behind firewalls.

We are a financial institution and we use Cisco Ethernet Switches as part of our network infrastructure.

The use cases that we have delivered to our customers include for hotel enterprises, government organizations, even military locations. This includes access switches and also distribution switches - perhaps for some organizations in call and data centers, as well.

Our main use case of ethernet switches is for security networks for digital video, digital access control, and digital inter-communications. Most of our work is for public institutions, including hospitals and universities when they need upgrades to POE switches. We're consultants in the security industry and I'm the senior project manager/systems engineer.

I am using it for core data infrastructure. I am using model 9600.

My primary use case is in a balance network across my company.

We have a local network and we have four Cisco Ethernet Switches that have 48 ports.

I'm a senior security network engineer and we have a gold partnership with Cisco.

We have them set up for customers, including SMB, Kindergarten through grade 12 schools, higher education organizations, and some enterprises. It's pretty much been used for everything except the federal government.

We are using it for user connectivity. We are using its latest version. It is deployed on a public cloud and on-premises.

We work for our customers. Our clients are small, medium, and enterprise companies.

We primarily use the solution as a networking switch.

I use it for plug-ins, wireless, and WiFi, and to use the Cisco controller.

We don't work with the latest version, which is why I am currently conducting research. We wish to see if we can move from the existing solution to an upgrade. We have been using 2960 switches for a very long time, say... five, six or seven years, and they have reached the end of their lives, which is why I proposed a change.

This solution is used as a networking switch for my customers.

We built all our ground network on Cisco Switches.

We use Cisco Ethernet Switches for local area networks in banks.

I use this solution as a network switch and I provide service to the switches to my customers.

We use Cisco Ethernet Switches for our data center, management center, and at our headquarters.

We are using the solution as switches for our organization's network.

Generally, we use the product just to switch traffic.

We use these switches to improve client connections. We're a manufacturing facility — we have POCs and terminals. We have maybe 90 to 100 users with desk phones, and roughly 20 printers. We don't perform maintenance ourselves. A third-party company handles the maintenance. We also outsource other vendors to help us with some complex configurations that we've had implemented.

We're primarily using the solution for Jim basically the whole IT infrastructure, including the broadcast facility on the management side. It uses Cisco switches, which we spread out with the 9500 Series as sort of the main switches. We also use 93180s to create the backbone or spine of our setup.

They are used as the access and core switches in our network.

We primarily use the solution in our data center or campus connectivity. We're using bridges to connect end-user devices and terminals.

We use it for data centers and for connecting computers in a local network.

We use it for VLAN tagging and VLAN port enabling.

We use Cisco Ethernet Switches to improve the latency in the Data Center.

We are a solution provider and Cisco Ethernet Switches are one of the products that we offer for our customers. With Cisco, there are two areas. There are gigabit switches, both managed and unmanaged, and there are 100 Mbps switches. Generally, the Cisco switches available in India are L2 or L3. The L2 switch is mainly used for internet connectivity, for internet ISP users.

We use Cisco Ethernet Switches for LAN networking and connecting our systems.

We use the solution for LAN connectivity.

They are superior in their class, and there are different functionalities for different models. We are using this solution on campus. You can roll-out the feature to anywhere from 100 to 10,000 users. You can link the main campus to the small offices and deploy the features.

We primarily use the solution like a normal wired network. We use it in the area before you connect it to outer networks using the firewall. Our inner network is managed by switches. All the wired connections come to those switches. We can do internal networking on the switches such as VLANs and all of those things. We use it for basic switching purpose.

Our datacenter is built using Cisco switches. We use Cisco products for wireless access, routing, and switching.

We are using the solution for LAN routing in both manufacturing industries and IT sectors. We use a variety of different models of the solution. We have used the 4000, 9000, 9200, and 9400 Series switches. Currently, we are deploying the 9000 Series to customers at data centers and when it comes to core switches at data centers we are using the 9400 model.

We are a GSM mobile network operator and we use the solution for internet data.

We are using Cisco Switches in a data center for access at the core level and the access level as well.

We use Cisco Ethernet Switches as part of our network infrastructure at two different sites.

How we use Cisco Ethernet Switches depends on the customer's requirements. We just connected Alliance switches with trans 2/4 switches in our office, and we have deployed it as a static configuration. We are not planning any other protocol for the permission and the configuration we aren't using. But for our customers, we go with the VMA architecture, networking, and Cloud Meraki and Experian from Cisco.

We primarily use the solution for our data center and edge switches. Like a lot of companies, we use (in the data center) core switches on Layer 3, and (on the edge) switches in Layer 2.

Our primary use case is for ethernet switches. We mainly use switches and routers as edge distribution switches. Some of the plants have been with the big pharmaceutical company Aragon. We have also been with a North American company, and others. Most of their switches were Cisco in pharmaceutical company where I worked for 10 years. Some of the switches in the plants were used as a core. Many of them, especially in Bulgaria and in Europe, I installed myself. Others in America are responsible during the shift time for the configuration changes and so on. They are used in any level, as a Layer 3, Layer 2, whatever. All kinds of switches are used in the different places in our LAN.

We use these switches as part of our data center infrastructure.

We are a fiber-optic provider. We have a lot of switches from Cisco and some from Microchip. We have C3750E, which is one of the main Cisco Ethernet switches. All ports of this switch are fiber. We have a local Cisco partner here who is quite reliable, so we patronize that partner. They do everything on our behalf, especially the licenses.

We are a solution provider and the Cisco Ethernet Switch is a network infrastructure product that we implement for our clients. The use case depends on their requirements but it is used for network access. We also use them for our network.

We are system integrators. We deal with Cisco solutions for our customers in data centers, enterprise networks, and Service Cloud networks.

We primarily use the solution for data centers and also for local area networks for enterprises.

connect our servers

We are a solution provider and Cisco Ethernet Switches are one of the products that we implement for our customers. We also use them internally, and they make up the backbone of our network.

We use these switches in our data center core to handle all of the converged networks. They handle our SAN servers as well as other components. The outer perimeter is handled by the Cisco 2960s, for distribution of traffic to endpoint clients.

We have a few different buildings within our premises, and we typically use the Cisco switches as the core backbone of our LAN. They are connected with fiber. We use them for our network to handle security and connectivity mainly. Our core business is to sell beverages, so we're not your typical telecom or banking institution that would be a typical Cisco client.

We use it for the local area network.

Cisco Ethernet Switches are the product line I have the most experience with and have been my go-to solution for many years with mid to large organizations over the years. They are still top contenders for environments that need layer 3 functionality in a switch. They have a product line that covers the entire spectrum of switching technology from the high-end Nexus products through the traditional enterprise catalyst models and all the way down to the small business solutions. They seem to have the market covered with a solution to meet any IT shop's needs.

Cisco Ethernet Switches are being used as part of our new data centers.

We primarily use the solution for infrastructure.

We use this solution to connect our computers.

We use this solution for our university campus network.

We primarily use the solution on our equipment.

I have been using the newest line of Cisco switches, the 9300 series, for two or three years. We have two different models for deployment. One is the SDN deployment model, which has to do with Software-Defined Networking and is the more recent. The other is the traditional three-tier, via core access aggregation layer five switches with an Independent Architecture Designed environment or access layer switches where you just use them to connect users to a specific service. It depends on what the nature of the work would be and the scope of work. But generally, most traditional networks have three layers. You have switches in a core of the network, switches in the distribution or aggregation layer, or switches in the access layer. This is the Three-tier module. If it is a collapsed core then it would be just simply the core and the access. A primary use case is you could use it to connect mostly end-users and host systems. Systems could be servers, systems could be printers, systems could be telephones, and systems could be video conferencing equipment. That's one end use of it. Another is the use in the data center. Ethernet Switches can be used in a data center out to provide connectivity, wired connectivity for servers, database systems, platforms, other platforms systems, and storage systems. With Ethernet you could have different speeds, so you can have Ethernet running at 1Gig, you can have Ethernet at 10Gig, you can have Ethernet at 40Gig, and you have Ethernet at 100Gig. So, depending on the nature of connectivity, you have that in the data center, you can have that also in an office environment. Then you go up to have it in industrial space, monitoring of industrial machines and control systems. So again, Ethernet is widely used.

We primarily use the solution for access aggregation and IP routing.

We primarily use this solution to connect networks and devices.

Our clients use this solution for monitoring and configuration purposes. The deployment model varies from client to client.

The primary use case of this solution is for connectivity of local network LAN switching. The deployment model is on-premises.

The primary use case is for LAN networking. This solution is also used for internet routing in small businesses. The deployment model we used was on-premises.

We use Cisco as a business switch on a small network of about 30 users. We use it for internet sharing, as centralized management for the network and active directories, as a domain controller, and for file sharing.