Try our new research platform with insights from 80,000+ expert users

AppNeta by Broadcom vs PRTG Network Monitor comparison

 

Comparison Buyer's Guide

Executive SummaryUpdated on Mar 9, 2025

Review summaries and opinions

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:
 

Categories and Ranking

AppNeta by Broadcom
Ranking in Network Monitoring Software
34th
Ranking in Cloud Monitoring Software
28th
Average Rating
8.6
Reviews Sentiment
7.3
Number of Reviews
17
Ranking in other categories
Digital Experience Monitoring (DEM) (7th), DX NetOps (3rd)
PRTG Network Monitor
Ranking in Network Monitoring Software
5th
Ranking in Cloud Monitoring Software
8th
Average Rating
8.2
Reviews Sentiment
7.1
Number of Reviews
101
Ranking in other categories
IT Infrastructure Monitoring (8th)
 

Mindshare comparison

As of April 2025, in the Network Monitoring Software category, the mindshare of AppNeta by Broadcom is 0.6%, down from 0.7% compared to the previous year. The mindshare of PRTG Network Monitor is 4.2%, down from 5.0% compared to the previous year. It is calculated based on PeerSpot user engagement data.
Network Monitoring Software
 

Featured Reviews

Cliff Chapman - PeerSpot reviewer
Excellent support, easy configuration, and a reliable tool to know what the problem is and where the problem is
They should try and make diagnostics run a bit quicker. When the problem occurs on a network, AppNeta runs automatic diagnostics on the end-to-end path. The path it was testing only to the destination, it now runs the same test to all of the devices and all the intermediate devices. Depending on the number of intermediate devices, it can take several minutes to run. If we're trying to find or diagnose a problem that only lasts two or three minutes, it may be that the diagnostics is still running by the time the problem is cleared. The only thing, which I have also mentioned to AppNeta in the past, is that there should be much faster and much more lightweight diagnostics, which can be completed within 30 seconds or one minute, rather than in 5 to 10 minutes. Currently, when we have short-duration problems, we use a different tool, but we only use that different tool for short-duration problems. With AppNeta, as long as the problem exists for more than a few minutes, such as within 10 to 15 minutes, we can normally tell where the problem is. However, most of the problems that we deal with are intermittent. They're very rarely a permanent condition that needs to be addressed. That makes it more difficult to troubleshoot. We would look to see at least two or three events and hope they show the same results to raise our confidence that we've actually found the problem, rather than just a problem.
Tochukwu Uzomba - PeerSpot reviewer
Efficiently monitor networks across regions with seamless setup and robust feature set
PRTG Network Monitor is easy to set up. Within a few minutes, it is operational. It is an all-in-one monitoring solution without extra costs. For example, we set it up for an insurance company with branches across Africa. We are able to monitor from Lagos without installing anything in the branches, using the agentless feature. We just put in the IP address and the parameter, and we monitor from those ends. Additionally, all the sensors are very useful. Most people are interested in the bandwidth monitoring sensor to see what bandwidth the users are consuming. The pricing is affordable compared to SolarWinds.

Quotes from Members

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:
 

Pros

"The main feature that we use is what they call Delivery, which is the testing of network paths end-to-end."
"We get complete, hop-by-hop visibility into the internet and we can know how much latency is taking place from one hop to another. That way, we know whether a particular hop belongs to the ISP, or that it is something owned by our own client's office, or is something to do with the SaaS network."
"This solution helps prove that, if we move to cloud, we'll still be as effective as we are on-premises."
"The solution's technical support is very good."
"Delivery and experience are valuable. The usage in terms of the traffic application captures and other similar things is also valuable."
"The product helps us understand networks and user experience. It helps us to understand the issues."
"A lot of times one of the AppNeta transactions showed that there is an issue, whereas everything seemed to be working properly. Once we dug into it, we realized that it really was highlighting a problem that otherwise we would not have seen."
"It is nice to have one place where all the information is right there in front of us."
"Stable solution for monitoring networks and bandwidth, with multiple functions and features such as NetFlow Collector, graphical monitoring, etc."
"I found PRTG Network Monitor very useful for troubleshooting and monitoring the utilization of either the network or server."
"There is a simplicity to setting up the extra sensors. It's really easy for us to build infrastructure and start monitoring very quickly."
"The solution provides us response times to issues."
"The most valuable features of PRTG Network Monitor are bandwidth utilization, user-friendliness, all past report simple retrievals, and timeout features. Additionally, if the solution does go down it is simple to bring it back."
"PRTG has improved our visibility and response time to issues related to remote sites."
"The real-time monitoring feature in PRTG is invaluable to me"
 

Cons

"I would like to see some advanced dashboard features. It could also be integrated with third-party tools. For example, an integration with a reporting solution would be helpful. Out-of-the-box, there are few dashboards or reports. What it does have is useful, but there should be additional dashboards."
"AppNeta by Broadcom needs to add more features to its dashboards. It also needs to work on providing out-of-the-box reports."
"Cloud monitoring could be better. That's one of the biggest pain points for me. I have shared this feedback with them multiple times, but they're limited to some extent. That's one area where I've seen a problem."
"Instead of integrating with other people, they should expand their interior capabilities."
"Having to deal with configuring the end devices using a USB stick is a bit cumbersome. It would be nice if there was a better way of handling that."
"They should try and make diagnostics run a bit quicker. When the problem occurs on a network, AppNeta runs automatic diagnostics on the end-to-end path. The path it was testing only to the destination, it now runs the same test to all of the devices and all the intermediate devices. Depending on the number of intermediate devices, it can take several minutes to run. If we're trying to find or diagnose a problem that only lasts two or three minutes, it may be that the diagnostics is still running by the time the problem is cleared. The only thing, which I have also mentioned to AppNeta in the past, is that there should be much faster and much more lightweight diagnostics, which can be completed within 30 seconds or one minute, rather than in 5 to 10 minutes."
"I think some of the product's documentation has shortcomings and needs improvement."
"The product could be improved by being cross-platform friendly."
"The solution has to evolve as an end-to-end monitoring solution. It has to do better at understanding the application at the deepest level."
"The remote probes seem to be a little bit buggy at times. They just stop working or they say they can't communicate. What we tend to do to is install the remote app onto the servers that we use. That seems to clear it up."
"I am not sure the solution is giving me all the needed feedback that we need. When something goes off on our IT infrastructure, it does tell me. However, it would be nice if it gave more intuitive information, e.g., the hard drive has gone up by 60 percent in an hour."
"The only sort of limitation is the actual probes. So, if you don't have enough probes on there, you can over flip them and cause the WMI sensors and SNMP sensors to sort of overload. Sometimes, they might timeout for a minute, but they do come back."
"In the next release, PRTG Network Monitor should add a backup solution."
"It would be nice if it gave us alerts via Gmail or SMS message."
"PRTG Network Monitor can improve by having better integration with devices."
 

Pricing and Cost Advice

"Broadcom software is always a little expensive because they provide quality."
"I find the solution's price to be fairly good."
"I inherited this from a different version, and I haven't yet gone through a renewal because we had purchased three years upfront. So, to me, that still remains to be seen. Once it comes up for renewal, we'll see what happens. Especially because now it is Broadcom, it is going to change anyway."
"The small probe is probably around $3,000 and the very large probe that they make for massive data centers might be $50,000 or $60,000. It's a subscription model, so the payment is per year."
"We typically don't get involved in the commercial side, but the list price is probably something like $3,000 for a small probe. However, that gives all of the features that the probe can do, whether or not you use them. In the old days, up until two or three years ago, each of the separate features was a separately licensable module so that you could add things that you wanted, and you didn't have to add things that you didn't want. They've changed all that now, and everything the probe can do is a part of the base license."
"It's worth the money."
"AppNeta by Broadcom is not expensive."
"We pay for a perpetual license and we have a support fee."
"The ability to use the base version with 100 free sensors is great. The cost on other packages can be very reasonable."
"Right now, the smallest sensor pack that they have is just a bit out of range for me, as a business. This kills me, as I need the product. Therefore, there is always a balance between needing to buy it or continuing their free version."
"Because we are only on the free version, we have a limited number of sensors. Therefore, we are not monitoring as much as we want to be to obtain historical information."
"The pricing is very low compared to other solutions."
"We are licensed for 2500 endpoints."
"The price of PRTG Network Monitor is reasonable for the features that the solution provides. They charge you per monitoring, not per node, it is per port that you need for a device."
"We are satisfied with the price."
report
Use our free recommendation engine to learn which Network Monitoring Software solutions are best for your needs.
844,944 professionals have used our research since 2012.
 

Comparison Review

it_user174738 - PeerSpot reviewer
May 31, 2015
Nagios vs. Zabbix vs. PRTG vs. Spiceworks vs. Solarwinds Network Performance Monitor
I have researched a quite a few network monitoring tools which can be used for various monitoring purposes of not only the servers, but the intermediate routers as well. There are majorly three types of these softwares. Ones which are completely open-source, you can do almost anything you want…
 

Top Industries

By visitors reading reviews
Computer Software Company
42%
Financial Services Firm
12%
Manufacturing Company
12%
Real Estate/Law Firm
4%
Educational Organization
53%
Computer Software Company
8%
Government
5%
Financial Services Firm
5%
 

Company Size

By reviewers
Large Enterprise
Midsize Enterprise
Small Business
 

Questions from the Community

What open source tool can one use to measure bandwidth from one's upstream service provider?
One I am looking closely at is AppNeta. They have an appliance that can digest the flow and do a better job than Netflow. The other one we are using is ExtraHop. This has both a Datacenter Hig...
What do you like most about AppNeta?
The product helps us understand networks and user experience. It helps us to understand the issues.
What is the best network monitoring software for large enterprises?
PRTG network monitor is one of the best tool i have ever used for the monitoring. It have auto discovery option. it avoid the configuring the device in PRTG. It automatically discover the device an...
What do you like most about PRTG Network Monitor?
The tool is integrated with our email for the alerts.
What is your experience regarding pricing and costs for PRTG Network Monitor?
The prices are very high for PRTG Network Monitor. That's why I'm using the free100 sensor license.
 

Overview

 

Sample Customers

Ebay, Citrix, National Instruments, Marriott, AT&T, Bon-Ton, McDonald's, Netflix, PayPal, Uber, QAD
Jameson Bank, Sidnix, RungeICT, MedicalAnimal, Truck-lite, GamingGrids, The Covell Group, Forsythn County Schools, NetMass, Musgrove Park Hospital, Lanes Health, Columbia Southern University, Vodafone, Intrust Bank
Find out what your peers are saying about AppNeta by Broadcom vs. PRTG Network Monitor and other solutions. Updated: February 2025.
844,944 professionals have used our research since 2012.